How to Do Your Own Fence Installation

Fence installation is a great way to beautify your yard, add privacy and increase security. The process can be difficult, though, so you may want to hire a professional to help with the job.

Before deciding to build a fence, you should take into account your family's reasons for wanting one and the overall design of your yard. This will help you select the right material, style and height. You should also consider the season when you'll install it and how much care your new fence will require.

You should also check your local zoning ordinances to make sure that your fence installation falls within the rules of your community. A violation could mean a fine, or you might have to tear down your fence.

Start by preparing the ground for your fence by clearing away any branches, roots or rocks that might interfere with the construction process. Then, dig holes for the fence posts. This will be the most time-consuming part of the project, so you'll want to do it carefully and accurately. Continue reading this page to learn more about fence installation.

Measure the distance between the first and last fence post to ensure that each fence post is positioned properly. You'll need to be very precise here, so it's a good idea to have someone else double-check your measurements before you start digging.

Dig the holes for your fence posts using a posthole digger or two-person auger. These tools are available at most hardware stores. The hole should be at least twice the diameter of the fence post and about one-third the length.

Fill the holes with cement. The best cement for this purpose is concrete. Mix it in a wheelbarrow, so you can get the right consistency before putting it into the holes.

Set each fence post in the hole, allowing it to rest about 1/8 inch above the top and bottom strings. This will prevent the fence from swaying when you pull it up and move it around. You should also tamp the soil into place to ensure it's solidly seated in the hole.

Once all the posts are in, use a hammer to secure the tops and bottoms of each post to the ground. You should also place a small wooden stake at each corner of the fence.

After the fence posts are securely in place, attach the rails to the fence posts. You'll need to run a top and bottom rail for a 4-foot-tall fence, and a third rail in the middle for taller fences.

When you're ready to start installing the pickets, lay the first row of pickets across each fence post. Depending on the style of your fence, you may need to use screws or nails to hold them in place. Once all the pickets are in place, secure them to the top and bottom rails of each fence post. Visit this homepage to discover more about fence installation.

For a more decorative effect, you can paint or stain your fence. This will make your fence look more attractive and increase its durability.

To familiarize yourself with this topic, read this article: https://en.wikipedia.org/wiki/Chain-link_fencing.