How to Do Fence Installation
Fence installation is a great way to enhance your property, add privacy and increase security. It can also be an inexpensive project that you can do yourself or with a professional contractor.
The first step is to measure the area you want to enclose with a fence. This can be done with a tape measure or even with a ruler. It's important that the measurement is accurate because it will guide you in choosing fence materials and designing your fence. If the measurements are inaccurate, the final fence could be unsatisfactory and costly to repair. Visit this website to explore more about fence installation.
Once you know the size of your area, you can determine how many fence panels you'll need. The average fence panel is about six or eight feet wide, so divide the area's perimeter by this length to get the number of panels you'll need.
Next, you need to place corner posts at each corner of your fence line. These corner posts will hold your fence in place and ensure that the fence panels will align properly and be level.
Before you begin installing the fence, check to see if your community has any restrictions on height, style or materials that must be used in fence construction. Some cities and neighborhoods have strict guidelines, and you may need to apply for a variance if your fence falls outside of those restrictions.
After you've checked with your local government, make sure to check with your neighbors about any restrictions they have on fencing in their yard. This can protect you from having to remove your fence and rebuild it later if you violate their property rights.
To help you determine the best placement for your fence, mark where each of the posts will go with a string guide. This will help you to create a straight line and to keep your fence lines even, which can be difficult if your home site is sloped or has an unusual jog.
It's also a good idea to have a surveyor come to your home site to measure the property boundaries and mark them with wooden stakes. This will also help you avoid any future disputes with your neighbor if they've built on their property or tried to sell it.
Once you've marked the property boundaries, contact JULIE to have underground utility lines located on your property for free before you begin digging the holes for your fence posts. This will also help to protect your neighbor's property from any damage caused by the digging process. To find out more about fence installation, visit this link.
When you're ready to dig the holes for your fence posts, use a post hole digger to make deep holes that are at least 1/3 to 1/2 of the length of each post. The posts should be dug below the frost line to prevent them from shifting or collapsing during cold weather.
If your ground is particularly tough, the fence installation company you hire may dig the holes with a gas or electric post-hole digger. They should be able to get the job done quickly and easily without damaging your soil.
This post has expounded on this topic, check it out. https://en.wikipedia.org/wiki/Aluminum_fencing.